CareerExamPro

NCEES PE Civil Water Resources & Transportation Exam practice test

8 practice questions for this exam, each with a full explanation and cited rule or blueprint reference.

Start practising

CA Seismic, NCEES PE/SE & BGC CIH: practice drill

10 realistic exam questions, graded as you go, with the exact rule or statute citation for every answer. Start free, no sign-up.

Practice tests that prepare you for this exam

Practise by topic

About this exam

Agency / Issuer
NCEES
Region
United States

Exact question counts, passing scores, and allowed reference materials vary by testing window and state/agency. Always confirm current rules with the official testing provider.

Sample questions

A municipal water transmission main (L = 2,000 ft, internal diameter D = 16 in., Hazen-Williams roughness coefficient C = 120) conveys a peak-hour flow of Q = 4.0 cfs. Using the U.S. customary Hazen-Williams formula (h_f = 4.73 * L * Q^1.852 / (C^1.852 * D^4.87)), what is the friction head loss h_f across the 2,000 ft segment?

  1. 4.28 ft, with pipe diameter D = 1.333 ft and mean flow velocity V = 2.86 ft/s.
  2. 8.56 ft, applying a 2.0 safety multiplier for aging water distribution mains.
  3. 1.92 ft, entering D = 16 in. directly without converting pipe diameter into feet.
  4. 12.64 ft, squaring Q and raising D to the fifth power as in Darcy-Weisbach.
Show the answer

A. 4.28 ft, with pipe diameter D = 1.333 ft and mean flow velocity V = 2.86 ft/s.

With D = 16 / 12 = 1.3333 ft, A = pi * (1.3333)^2 / 4 = 1.396 ft^2, and V = 4.0 / 1.396 = 2.86 ft/s. Substituting into Hazen-Williams: h_f = 4.73 * 2,000 * (4.0)^1.852 / (120^1.852 * (1.3333)^4.87) = (9,460 * 13.032) / (7,090.7 * 4.058) = 123,283 / 28,774 = 4.28 ft (confirmed by V = 1.318 * C * R^0.63 * S^0.54, which also yields S * L = 4.28 ft).

Reference: NCEES PE Civil Reference Handbook (Hazen-Williams Pipe Friction Head Loss)

A 12.0-acre urban drainage basin draining to a single storm inlet consists of three land-use subareas:

TEXT
Commercial paving:  4.0 acres, runoff coefficient C = 0.85
Single-family lots: 6.0 acres, runoff coefficient C = 0.45
Neighborhood park:  2.0 acres, runoff coefficient C = 0.20

For the 25-year design storm at the basin's time of concentration (t_c = 15 min), the IDF curve gives a rainfall intensity of i = 3.50 in./hr. Using the Rational Method (Q = C * i * A), what are the area-weighted composite runoff coefficient C_w and peak discharge Q?

  1. C_w = 0.500 and Q = 21.00 cfs, taking the unweighted mean of the three C values.
  2. C_w = 0.850 and Q = 35.70 cfs, applying the highest subarea C across the entire 12-acre watershed.
  3. C_w = 0.542 and Q = 22.75 cfs, computed from the area-weighted sum of C_i * A_i.
  4. C_w = 0.542 and Q = 19.50 cfs, applying a 0.857 urban detention reduction factor.
Show the answer

C. C_w = 0.542 and Q = 22.75 cfs, computed from the area-weighted sum of C_i * A_i.

The area-weighted composite runoff coefficient is C_w = sum(C_i * A_i) / A_total = (4.0 * 0.85 + 6.0 * 0.45 + 2.0 * 0.20) / 12.0 = (3.40 + 2.70 + 0.40) / 12.0 = 6.50 / 12.0 = 0.5417 (0.542). Applying the Rational Method (1 acre-in./hr = 1.008 cfs ~ 1.0 cfs), peak runoff is Q = C_w * i * A = 0.5417 * 3.50 * 12.0 = 6.50 * 3.50 = 22.75 cfs.

Reference: NCEES PE Civil Reference Handbook / HEC-22 Urban Drainage Design Manual (Rational Method)

A two-lane rural highway is being designed for a speed of V = 55 mph with a maximum superelevation rate of e_max = 6.0% (0.06) and an AASHTO limiting side friction factor of f_max = 0.13. Using the AASHTO horizontal curve equation R_min = V^2 / (15 * (e + f)), what is the minimum allowable centerline radius R_min?

  1. 2,881 ft, subtracting superelevation from side friction as (f - e) in the denominator.
  2. 1,061 ft, computed from 55^2 / (15 * (0.06 + 0.13)) using decimal e and f.
  3. 3,361 ft, relying solely on 6% superelevation with zero side friction.
  4. 1,592 ft, replacing the U.S. customary mph constant 15 with 10 in the denominator.
Show the answer

B. 1,061 ft, computed from 55^2 / (15 * (0.06 + 0.13)) using decimal e and f.

Under AASHTO Green Book Chapter 3, the minimum radius for a horizontal circular curve in U.S. customary units (V in mph, e and f as decimals) is R_min = V^2 / (15 * (e + f)). Substituting V = 55 mph, e = 0.06, and f = 0.13: R_min = 55^2 / (15 * (0.06 + 0.13)) = 3,025 / (15 * 0.19) = 3,025 / 2.85 = 1,061.4 ft (1,061 ft; rounded up to 1,065 ft or 1,070 ft in design tables).

Reference: AASHTO Green Book Section 3.3.5 (Minimum Radius of Horizontal Curves & Superelevation)

Taking this exam soon?

Tell us which exam domains or calculation drills you want more practice on.

Other PE Civil, CA Seismic & CIH exams