PE Civil Water/Transpo, PE Mechanical/Power & BGC CIH Industrial Hygiene practice drill
10 realistic exam questions, graded as you go, with the exact rule or statute citation for every answer. Start free, no sign-up.
Sample questions
A municipal water transmission main (L = 2,000 ft, internal diameter D = 16 in., Hazen-Williams roughness coefficient C = 120) conveys a peak-hour flow of Q = 4.0 cfs. Using the U.S. customary Hazen-Williams formula (h_f = 4.73 * L * Q^1.852 / (C^1.852 * D^4.87)), what is the friction head loss h_f across the 2,000 ft segment?
4.28 ft, with pipe diameter D = 1.333 ft and mean flow velocity V = 2.86 ft/s.
8.56 ft, applying a 2.0 safety multiplier for aging water distribution mains.
1.92 ft, entering D = 16 in. directly without converting pipe diameter into feet.
12.64 ft, squaring Q and raising D to the fifth power as in Darcy-Weisbach.
Show the answer
A. 4.28 ft, with pipe diameter D = 1.333 ft and mean flow velocity V = 2.86 ft/s.
With D = 16 / 12 = 1.3333 ft, A = pi * (1.3333)^2 / 4 = 1.396 ft^2, and V = 4.0 / 1.396 = 2.86 ft/s. Substituting into Hazen-Williams: h_f = 4.73 * 2,000 * (4.0)^1.852 / (120^1.852 * (1.3333)^4.87) = (9,460 * 13.032) / (7,090.7 * 4.058) = 123,283 / 28,774 = 4.28 ft (confirmed by V = 1.318 * C * R^0.63 * S^0.54, which also yields S * L = 4.28 ft).
Reference: NCEES PE Civil Reference Handbook (Hazen-Williams Pipe Friction Head Loss)
A 12.0-acre urban drainage basin draining to a single storm inlet consists of three land-use subareas:
TEXT
Commercial paving: 4.0 acres, runoff coefficient C = 0.85
Single-family lots: 6.0 acres, runoff coefficient C = 0.45
Neighborhood park: 2.0 acres, runoff coefficient C = 0.20
For the 25-year design storm at the basin's time of concentration (t_c = 15 min), the IDF curve gives a rainfall intensity of i = 3.50 in./hr. Using the Rational Method (Q = C * i * A), what are the area-weighted composite runoff coefficient C_w and peak discharge Q?
C_w = 0.500 and Q = 21.00 cfs, taking the unweighted mean of the three C values.
C_w = 0.850 and Q = 35.70 cfs, applying the highest subarea C across the entire 12-acre watershed.
C_w = 0.542 and Q = 22.75 cfs, computed from the area-weighted sum of C_i * A_i.
C_w = 0.542 and Q = 19.50 cfs, applying a 0.857 urban detention reduction factor.
Show the answer
C. C_w = 0.542 and Q = 22.75 cfs, computed from the area-weighted sum of C_i * A_i.
A two-lane rural highway is being designed for a speed of V = 55 mph with a maximum superelevation rate of e_max = 6.0% (0.06) and an AASHTO limiting side friction factor of f_max = 0.13. Using the AASHTO horizontal curve equation R_min = V^2 / (15 * (e + f)), what is the minimum allowable centerline radius R_min?
2,881 ft, subtracting superelevation from side friction as (f - e) in the denominator.
1,061 ft, computed from 55^2 / (15 * (0.06 + 0.13)) using decimal e and f.
3,361 ft, relying solely on 6% superelevation with zero side friction.
1,592 ft, replacing the U.S. customary mph constant 15 with 10 in the denominator.
Show the answer
B. 1,061 ft, computed from 55^2 / (15 * (0.06 + 0.13)) using decimal e and f.
Under AASHTO Green Book Chapter 3, the minimum radius for a horizontal circular curve in U.S. customary units (V in mph, e and f as decimals) is R_min = V^2 / (15 * (e + f)). Substituting V = 55 mph, e = 0.06, and f = 0.13: R_min = 55^2 / (15 * (0.06 + 0.13)) = 3,025 / (15 * 0.19) = 3,025 / 2.85 = 1,061.4 ft (1,061 ft; rounded up to 1,065 ft or 1,070 ft in design tables).
Reference: AASHTO Green Book Section 3.3.5 (Minimum Radius of Horizontal Curves & Superelevation)